The PTL Pneumatic Temperature
Controller operates over a wider temperature
range than our standard “T” temperature pilot.
These temperature controllers also react quicker to
temperature change which make them an excellent
choice for instantaneous hot water applications.
The PTL controller is designed to be directly mounted to a process tank or vessel.
The PTL Pneumatic Temperature
Controller is used in conjunction with an
“A” Air Pilot to control the operation of the HD Regulator. The PTL uses a bimetallic element to
sense temperature.
The air supply is connected to the inlet of the controller
and the air output signal is fed directly to an Air Pilot,
which controls the opening and closing of the steam
regulating valve.
Model: PTL Sensing Bulb: Material: Copper Max Pressure: 250 PSIG Max Temperature: 400 °F Temperature Adjustment Range: 50-350 °F Maximum Air Supply Pressure: 35 PSIG
PTR
The PTR Pneumatic Temperature
Controller operates over a wider temperature
range than our standard “T” temperature pilot.
These temperature controllers also react quicker to
temperature change which make them an excellent
choice for instantaneous hot water applications.
The
PTR controller is designed to be remotely mounted to a control panel; the sensor mounts directly to the process tank and connects to the controller with a capillary.
The PTR Pneumatic Temperature
Controller is used in conjunction with an
“A” Air Pilot to control the operation of the HD Regulator.The PTR uses a hydraulically
filled bulb with a 4-ft. capillary to sense temperature.
The air supply is connected to the inlet of the controller
and the air output signal is fed directly to an Air Pilot,
which controls the opening and closing of the steam
regulating valve.
Model: PTR Sensing Bulb: Material: Copper Max Pressure: 250 PSIG Max Temperature: 350 °F Temperature Adjustment Range: 0-300 °F Maximum Air Supply Pressure: 35 PSIG Capillary Length: 4 ft