| |
|
|
PMPT
|
The Model PMPT Low-Profile Pressure Motive Pump has an internal
Steam Trap for applications requiring compact design due to spatial
constraints. It is an excellent choice for drainage of various
modulating process equipment.
The PMPT allows condensate discharge under all operating
conditions of modulating equipment, including vacuum.
 CATALOG SPEC SHEET(S)
|
Model: PMPT
Pump Body Material: Ductile Iron
Trap Configuration: Internal
Check Valves: Stainless Steel
Max Capacity, Simplex, 6" Head, Steam Motive: 2,280 lbs/hr
Max Operating Pressure: 125 PSIG
Sizes : 1" x 1", 1-1/2" x 1-1/2"
Connections: NPT
|
| |
|
|
WPT1
|
The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining
heat exchangers or other equipment that is being fed by a temperature regulator
or a temperature control valve. In these applications, the steam pressure in the
heat exchanger may not be sufficient to overcome the back pressure in the
condensate return line. When this condition occurs, the pressure powered pump
takes over and uses high pressure steam supplied to the pump to discharge the
condensate through the trap. When sufficient pressure does exist, the system
functions like a standard steam trap.
CATALOG SPEC SHEET(S) |
Model: WPT1
Pump Body Material: Carbon Steel
Trap Configuration: External
Trap Body Material: Ductile Iron
Check Valves: Stainless Steel
Max Capacity, Simplex, 6" Head, Steam Motive: 1,720 lbs/hr
Max Operating Pressure: 150 PSIG
Sizes : 1" x 1"
Connections: NPT
|
| |
|
|
WPT2
|
The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap.
CATALOG SPEC SHEET(S) |
Model: WPT2
Pump Body Material: 304L Stainless Steel
Trap Configuration: External
Trap Body Material: Ductile Iron
Check Valves: Stainless Steel
Max Capacity, Simplex, 6" Head, Steam Motive: 2,840 lbs/hr
Max Operating Pressure: 150 PSIG
Sizes : 1-1/4" x 1-1/4"
Connections: NPT
|
| |
|
|
WPT3
|
The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap.
CATALOG SPEC SHEET(S) |
Model: WPT3
Pump Body Material: Cast Iron
Trap Configuration: External
Trap Body Material: Ductile Iron
Check Valves: Stainless Steel
Max Capacity, Simplex, 12" Head, Steam Motive: 5,230 lbs/hr
Max Operating Pressure: 150 PSIG
Sizes : 1-1/2" x 1-1/2"
Connections: NPT
|
| |
|
|
WPT4
|
The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap.
CATALOG SPEC SHEET(S) |
Model: WPT4
Pump Body Material: Carbon Steel
Trap Configuration: External
Trap Body Material: Ductile Iron
Check Valves: Stainless Steel
Max Capacity, Simplex, 12" Head, Steam Motive: 8,590 lbs/hr
Max Operating Pressure: 150 PSIG
Sizes : 2" x 2"
Connections: NPT
|
| |
|
|
WPT5
|
The Watson McDaniel WPT Series Pump-Trap Combination is excellent for draining heat exchangers or other equipment that is being fed by a temperature regulator or a temperature control valve. In these applications, the steam pressure in the heat exchanger may not be sufficient to overcome the back pressure in the condensate return line. When this condition occurs, the pressure powered pump takes over and uses high pressure steam supplied to the pump to discharge the condensate through the trap. When sufficient pressure does exist, the system functions like a standard steam trap.
CATALOG SPEC SHEET(S) |
Model: WPT5
Pump Body Material: Carbon Steel
Trap Configuration: External
Trap Body Material: Ductile Iron
Check Valves: Stainless Steel & Steel
Max Capacity, Simplex, 12" Head, Steam Motive: 13,300 lbs/hr
Max Operating Pressure: 150 PSIG
Sizes : 3" x 2"
Connections: NPT
|
