Products > Condensate Return Pumps > PMP Series Pumps

MODEL
TYPICAL APPLICATIONS
SPECIFICATIONS
     

PMPC

The PMPC Pressure Motive Pump body & cover are manufactured from ductile iron. ASME “UM” Code Stamp is available. This pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances. CATALOG SPEC SHEET(S) Model: PMPC
Body:  Ductile Iron
Check Valves: Stainless Steel
Max Capacity (3" x 2", 12" Head, Simplex, Steam Motive): 19,700 lbs/hr
Max Operating Pressure:  200 PSIG
Size (Inlet x Outlet): 1" x 1", 1-1/2" x 1", 1-1/2" x 1 1/2", 2" x 1", 2" x 1-1/2", 2" x 2", 3" x 2"
Connections: NPT
     

PMPF

The PMPF Pressure Motive Pump body & cover are manufactured from carbon steel. These tanks are fabricated with 1/8” corrosion allowance and receive the ASME “UM” Code Stamp. This pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances. CATALOG SPEC SHEET(S) Model:   PMPF
Body:  Carbon Steel
Check Valves: Stainless Steel
Max Capacity (3" x 2", 12" Head, Simplex, Steam Motive): 19,700 lbs/hr
Max Operating Pressure:  200 PSIG
Size (Inlet x Outlet): 1" x 1", 1-1/2" x 1", 1-1/2" x 1 1/2", 2" x 1", 2" x 1-1/2", 2" x 2", 3" x 2"
Connections: NPT
     

PMPSS

The PMPSS Pressure Motive Pump body & cover are manufactured from 304L Stainless Steel. These pumps receive the ASME “UM” Code Stamp. This pump is designed to be used in harsh and corrosive environments. CATALOG SPEC SHEET(S) Model:   PMPSS
Body:  304L Stainless Steel
Check Valves: Stainless Steel
Max Capacity (3" x 2", 12" Head, Simplex, Steam Motive): 19,700 lbs/hr
Max Operating Pressure:  150 PSIG
Size (Inlet x Outlet): 1" x 1", 1-1/2" x 1", 1-1/2" x 1 1/2", 2" x 1", 2" x 1-1/2", 2" x 2", 3" x 2"
Connections: NPT
     

PMPLS

The PMPLS Pressure Motive Pump is a lower profile than the standard PMPF model and is sometimes required when draining condensate from process equipment that is positioned close to the ground which limits the filling head of the pump. Pump & body cover are manufactured from carbon steel and receive the ASME “UM” Code StampCATALOG SPEC SHEET(S) Model:   PMPLS
Body:  Carbon Steel
Check Valves: Stainless Steel
Max Capacity (1" x 1", 6" Head, Simplex, Steam Motive): 2,520 lbs/hr
Max Operating Pressure:  150 PSIG
Size (Inlet x Outlet): 1" x 1", 1-1/2" x 1", 1-1/2" x 1-1/2"
Connections: NPT
     

PMPNT

The Model PMPNT Pressure Motive Pump has an extremely low profile. These low-profile tanks are required when draining condensate from process equipment positioned close to the ground which limits the filling head of the pump. CATALOG SPEC SHEET(S) Model:   PMPNT
Body:  Cast Iron
Check Valves: Stainless Steel
Max Capacity (1 1/4" x 1 1/4", 6" Head, Simplex, Steam Motive): 3,360 lbs/hr
Max Operating Pressure:  150 PSIG
Size (Inlet x Outlet): 1" x 1", 1-1/4" x 1-1/4"
Connections: NPT
     

PMPBP

The PMPBP is an extremely High-Capacity Pressure Motive Pump for applications requiring large transfer of condensate or other liquids. The internal operating mechanism functions identically to other pumps in the PMP series. ASME “U” Code Stamp is available. CATALOG SPEC SHEET(S) Model:   PMPBP
Body:  Carbon Steel
Check Valves: Stainless Steel / Steel
Max Capacity (24" Head, Simplex, Steam Motive): 49,500 lbs/hr
Max Operating Pressure:  150 PSIG
Size (Inlet x Outlet): 4" x 4"
Connections: NPT

 

Products > Condensate Return Pumps > PMP Series Pumps

 

Try Our Online Sizing & Selection Program!

Call, Fax or E-mail Us to Receive our Latest Product Catalog.

Questions? Contact us for your application needs.

Special requirements? Watson McDaniel can custom-engineer condensate pumping systems to meet your specific needs

Product Literature:

Product Catalog - Condensate Return Pumps

Introduction to Pressure Motive Pumps

Pumps with Receiver Tanks

Pump & Trap Combinations

Accessories & Options

Sizing & Selection of Pressure Motive Pumps

Customized Skid Packages

Pressure Motive Pump (PMP) Applications