WDS
 |
The WDS Series Air/Steam Moisture Separators are used for the removal of
entrained liquid or solids from steam. Effective in applications
were the system has an entrained liquid flow rate of up to
40% by weight of the unit’s flow capacity. CATALOG SPEC SHEET(S) |
Model: WDS Series
Body Material: Cast Iron
Max Capacity (Steam): 15,977 lbs/hr
Max Operating Pressure: 250 PSIG
Sizes: 3/4" - 4"
Connections: NPT, 125# FLG
|
WDS
 |
The WDS Series Air/Steam Moisture Separators are used for the removal of
entrained liquid or solids from steam. Effective in applications
were the system has an entrained liquid flow rate of up to
40% by weight of the unit’s flow capacity.CATALOG SPEC SHEET(S) |
Model: WDS Series
Body Material: Carbon Steel
Max Capacity (Steam): 143,331 lbs/hr
Max Operating Pressure: 300 PSIG (NPT & SW)
Sizes: 1" - 12"
Connections: NPT, SW, 150# FLG, 300# FLG
|
WCIS |
The WCIS Series Air/Steam Moisture Separators are used for the removal of
entrained liquid or solids from steam.
Typical Applications:
- On steam mains, as a drip station ahead of steam pressure
reducing or temperature control valves
- On the steam inlet to laundry presses and other process
equipment which require dry saturated steam
- On the compressed air supply to sensitive instruments
and before filtersCATALOG SPEC SHEET(S)
|
Model: WCIS Series
Body Material: Cast Iron
Max Capacity (Steam): 11,542 lbs/hr
Max Operating Pressure: 200 PSIG
Sizes: 3/4" - 4"
Connections: NPT, 125# FLG
|
