Products > Steam Traps > Float & Thermostatic Steam Traps

MODEL
TYPICAL APPLICATIONS
SPECIFICATIONS
     

FT

Watson McDaniel WD600 Steam Trap
DRIP, PROCESS: The FT Series Float & Thermostatic Steam Traps are used for HVAC and light industrial process applications, and can be applied to unit heaters, water heaters, pressing machines, heat exchangers, and coils. These traps have excellent air removal capability making them an excellent choice for HVAC and process applications requiring quick start-up.

CATALOG SPEC SHEET(S)

Model: FT
Body Material: Cast Iron
Max Capacity: 18,100 lbs/hr
Max Operating Pressure: 75 PSIG
Sizes: 3/4" - 2"
Connections: NPT
     

FT600 & FT601

Watson McDaniel FT600 Steam Trap
PROCESS The FT600 & FT601 Series High Pressure Float & Thermostatic Steam Traps are primarily used on industrial process applications. The excellent air handling capabilities of float and thermostatic traps make them a better choice than bucket traps for applications requiring quick system start-up. These traps have in-line pipe connections. Used in chemical plants and petrochemical refineries on reboilers, heat exchangers, and other critical process applications. Model FT601 is identical to FT600 except body material is 316 SS.

CATALOG SPEC SHEET(S)

Model: FT600 & FT601
Body Material: Carbon Steel / 316 Stainless Steel
Max Capacity: 61,250 lbs/hr
Max Operating Pressure: 450 PSIG
Sizes: 3/4" - 4"
Connections: NPT, SW, FLG
     

FTE & FTES

Watson McDaniel FTE/FTES Steam Trap
PROCESS: The FTE & FTES Series Float & Thermostatic Steam Traps are used in HVAC and on industrial process equipment with very high load requirements. These high capacity steam traps are typically used on reboilers, absorption chillers, large air handling coils, large heat exchangers, and other large process equipment.

CATALOG SPEC SHEET(S)

Model: FTE & FTES
Body Material: Ductile Iron / Cast Steel
Max Capacity: 105,000 lbs/hr
Max Operating Pressure: 200/300 PSIG
Sizes (FTE): 1-1/2" - 2-1/2"
Sizes (FTES): 2-1/2"
Connections (FTE): NPT
Connections (FTES): NPT, SW, FLG
     

FTT

Watson McDaniel FTT Steam Trap
DRIP, PROCESS: The FTT Series Float & Thermostatic Steam Traps are used in drip and process applications, industrial and HVAC process equipment. The excellent air handling capabilities of float and thermostatic traps make them a better choice than bucket traps for applications requiring quick system start-up. These traps have in-line pipe connections. Used on unit heaters, textile machines, heat exchangers, and other medium sized process equipment.

CATALOG SPEC SHEET(S)

Model: FTT
Body Material: Ductile Iron
Max Capacity: 61,300 lbs/hr
Max Operating Pressure: 300 PSIG
Sizes : 1/2" - 2"
Connections: NPT
     

WFT

Watson McDaniel WFT Steam Trap
PROCESS: The WFT Series Float & Thermostatic Steam Traps are used for HVAC and industrial process applications. The excellent air handling capabilities of these traps make them a better choice than bucket traps for applications requiring quick start-up. Used on unit heaters, textile machines, heat exchangers, and other process equipment.

CATALOG SPEC SHEET(S)

Model: WFT
Body Material: Cast Iron
Max Capacity: 11,020 lbs/hr
Max Operating Pressure: 250 PSIG
Sizes : 3/4" - 2"
Connections: NPT

Products > Steam Traps > Float & Thermostatic Steam Traps

 

Try Our Online Sizing & Selection Program!

Call, Fax or E-mail Us to Receive our Latest Product Catalog.

Questions? Contact us for your application needs.

Special requirements? Watson McDaniel can custom-engineer condensate pumping systems to meet your specific needs

Product Literature

Product Catalog - Steam Traps

Universal Style Steam Traps

Steam Trap Basics: An Introduction to Steam Traps