Products > Steam Traps > Thermodynamic Steam Traps test

MODEL
TYPICAL APPLICATIONS
SPECIFICATIONS
     

TD600

DRIP, TRACER: The TD600 Thermodynamic Steam Trap is commonly used as a drip trap on steam mains and steam supply lines. These traps can be used on tracing applications; however, thermostatic traps are normally recommended for this service. Ideal for outdoor applications that are subject to freezing and for superheated steam conditions.

Note: Model TD600L is a low-capacity version of the standard TD600 model.

CATALOG SPEC SHEET(S)

Model:   TD600
Body Material:  Stainless Steel 420F
Max Capacity:   4,840 lbs/hr
Max Operating Pressure:  600 PSIG
Sizes :  3/8" - 1"
Connections:   NPT
     

TD600S

Watson McDaniel TD600S Steam Trap
DRIP, TRACER: The TD600S Thermodynamic Steam Trap is commonly used as a drip trap on steam mains and steam supply lines. Supplied with integral strainer and optional blowdown valve to protect the trap from contamination. These traps can be used on tracing applications; however, thermostatic traps are normally recommended for this service. Ideal for outdoor applications that are subject to freezing and for superheated steam conditions.

Note: Model TD600LS is a low-capacity version of the standard WD600S model. Model TD600SB contains a strainer and blowdown valve.

CATALOG SPEC SHEET(S)

Model: TD600S
Body Material: Stainless
Max Capacity: 3,140 lbs/hr
Max Operating Pressure: 600 PSIG
Sizes : 1/2" - 1"
Connections: NPT
     

TD700S

Watson McDaniel TD700S Steam Trap
DRIP, TRACER: The TD700S Thermodynamic Steam Trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blowdown valve to protect the trap from contamination. The internal working mechanism of the WD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for superheated steam conditions.

Note: Model TD700HS is a high-pressure version of the standard WD700S model.

CATALOG SPEC SHEET(S)

Model: TD700S
Body Material: Chrome-Moly Alloy Steel
Max Operating Pressure: 600 PSIG
Max. Capacity: 1,750 lbs/hr
Sizes : 1/2" - 1"
Connections: NPT, SW, FLG
     

TD900S

DRIP: The TD900S/TD900LS Thermodynamic Steam Trap is primarily used as a drip trap on high pressure steam mains and steam supply lines. Ideal for outdoor applications that are subject to freezing and for superheated steam conditions.

Note: Model TD900LS is a low-capacity version of the standard TD900S model and recommended for working pressures of 120 PSIG and above.

CATALOG SPEC SHEET(S)

Model: TD900S
Body Material: Low Carbon Chrome-Moly
Max Operating Pressure: 900 PSIG
Max. Capacity: 968 lbs/hr
Sizes : 1/2" - 1"
Connections: NPT, SW, 600# FLG
     

TD3600

DRIP, TRACER: The TD3600 Thermodynamic Steam Trap is commmonly used as a drip trap on high-pressure steam mains and steam supply lines. Supplied with an integral strainer to protect the trap from contamination. The internal working mechanism of the TD3600 can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for superheated steam conditions.

CATALOG SPEC SHEET(S)

Model: TD3600
Body Material: Forged Alloy Steel
Max Operating Pressure: 3,600 PSIG
Max. Capacity: 625 lbs/hr
Sizes : 1/2" - 1"
Connections: BW, SW, 600# FLG, 1500# FLG
     
     

Products > Steam Traps > Thermodynamic Steam Traps

 

 

Try Our Online Sizing & Selection Program!

Call, Fax or E-mail Us to Receive our Latest Product Catalog.

Questions? Contact us for your application needs.

Special requirements? Watson McDaniel can custom-engineer condensate pumping systems to meet your specific needs

Product Literature

Product Catalog - Steam Traps

Universal Style Steam Traps

Steam Trap Basics: An Introduction to Steam Traps