Products > Steam Traps > Thermostatic Steam Traps

MODEL
TYPICAL APPLICATIONS
SPECIFICATIONS
     

WT1000

Watson McDaniel WT1000 Steam Trap
DRIP, TRACER: The WT1000 Thermostatic Steam Trap was specifically designed for drip and tracing applications as well as an air vent for heat exchangers. Like all thermostatic traps, the WT1000 is small, light, and has excellent air handling capabilities. The discharging of air on start-up allows steam to enter the system more quickly.

CATALOG SPEC SHEET(S)

Model: WT1000
Body Material: Stainless Steel
Max Capacity: 750 lbs/hr
Max Operating Pressure: 300 PSIG
Sizes : 1/2", 3/4"
Connections: NPT
     

WT2000

Watson McDaniel WT2000 Steam Trap
DRIP, TRACER, PROCESS: The WT2000 Thermostatic Steam Trap is used for drip, tracing, and process applications. Their compact size, all stainless steel construction, excellent air handling capabilities, and the ability to operate over a wide pressure range make them a good choice for most applications. They can also be used as an air vent on heat exchangers. Thermostatic traps are far superior to bucket traps and thermodynamic traps in their ability to remove air from the system. The discharging of air on start up allows steam to enter the system more quickly.

CATALOG SPEC SHEET(S)

Model: WT2000
Body Material: Stainless Steel
Max Capacity: 7,004 lbs/hr
Max Operating Pressure: 650 PSIG
Sizes : 1/2", 3/4"
Connections: NPT
     

WT2500

Watson McDaniel WT2500 Steam Trap
DRIP, TRACER, PROCESS: The WT2500 Thermostatic Steam Trap is used for drip, tracing and process applications. Their compact size, excellent air handling capability and wide operating pressure range make them a great choice for most applications. Thermostatic traps are far superior to bucket traps and thermodynamic disc traps in their ability to remove air from the system.

CATALOG SPEC SHEET(S)

Model: WT2500
Body Material: Cast Iron
Max Capacity: 5,093 lbs/hr
Max Operating Pressure: 250 PSIG
Sizes : 1/2", 3/4"
Connections: NPT
     

WT3000

Watson McDaniel WT3000 Steam Trap
PROCESS: The WT3000 Thermostatic Steam Trap is used for industrial process applications. Their compact size, all stainless steel construction, excellent air handling capability and wide operating pressure range make them a great choice for most process applications. Thermostatic traps are far superior to bucket traps and thermodynamic disc traps in their ability to remove air from the system.

CATALOG SPEC SHEET(S)

Model: WT3000
Body Material: Stainless Steel
Max Capacity: 7,004 lbs/hr
Max Operating Pressure: 650 PSIG
Sizes : 1/2", 3/4"
Connections: NPT, SW, FLG
     

WT4000

Watson McDaniel WT4000 Steam Trap
PROCESS: The WT4000 Thermostatic Steam Trap is used for industrial process applications. Their compact size, all stainless steel construction, excellent air handling capability and wide operating pressure range make them a great choice for most process applications. Thermostatic traps are far superior to bucket traps and thermodynamic disc traps in their ability to remove air from the system.

CATALOG SPEC SHEET(S)

Model: WT4000
Body Material:
Stainless Steel
Max Capacity: 12,540 lbs/hr
Max Operating Pressure: 300 PSIG
Sizes : 3/4", 1"
Connections: NPT, SW, FLG
     

WT5000

TRACER: The WT5000 Series Bimetal Steam Trap is used in steam tracing applications (process lines, instrumentation and winterization, general steam jacketing) and small process applications where accurate control of condensate discharge temperature is required to utilize the sensible heat of the condensate.

CATALOG SPEC SHEET(S)

Model: WT5000
Body Material:
Stainless Steel
Max Capacity: 942 lbs/hr
Max Operating Pressure: 650 PSIG
Sizes : 3/8" - 1"
Connections: NPT, SW
     

TA25B, TA125, TS25B, TS125

Watson McDaniel TT25B / 125 Steam Trap
TA25B,TA125,TS25B,TS125 Thermostatic Steam Trap are predominantly used in the HVAC industry. They are referred to as radiator traps because the quick-disconnect right angle connection is found on most radiator installations. Their excellent air handling capabilities, compact size, and economical cost make them a great choice for air vents on heat exchangers or for steam trap applications on OEM equipment.

CATALOG SPEC SHEET(S)

Model: TA25B, TA125 & TS25B, TS125
Body Material: Brass
Max Capacity: 3,300 lbs/hr
Max Operating Pressure: 25/125 PSIG
Sizes : 1/2", 3/4"
Connections: NPT

Products > Steam Traps > Thermostatic Steam Traps

 

Try Our Online Sizing & Selection Program!

Call, Fax or E-mail Us to Receive our Latest Product Catalog.

Questions? Contact us for your application needs.

Special requirements? Watson McDaniel can custom-engineer condensate pumping systems to meet your specific needs

Product Literature

Product Catalog - Steam Traps

Universal Style Steam Traps

Steam Trap Basics: An Introduction to Steam Traps