Products > Steam Traps > Universal Steam Trap Modules

MODEL
TYPICAL APPLICATIONS
SPECIFICATIONS
     

USIB450

DRIP, TRACER: The USIB450 Inverted Bucket Steam Trap Module, mounted to a universal connector, is typically used for drip and tracing applications. Also used on process equipment with light loads and where air removal is not critical. The WSIB450 trap module mounts to any universal connector.

Note: Model USIB450H is a higher capacity version of the standard USIB450 model

CATALOG SPEC SHEET(S)

Model: USIB450
Body Material: Stainless Steel
Max Capacity: 1,060 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
     

UFT450

PROCESS, DRIP: The UFT450 Float & Thermostatic Trap Module mounted to a universal connector, is typically used on process equipment that generate light condensate loads and require excellent air handling capabilities. These low capacity float & thermostatic trap modules can also be used in drip service on steam mains, tracer systems and steam supply lines. The WFT450 trap module mounts to any universal connector.

CATALOG SPEC SHEET(S)

Model: UFT450
Body Material: Stainless Steel
Max Capacity: 1,500 lbs/hr
Max Operating Pressure: 225 PSIG
Connections: Fits UC450 Series Universal Connectors
     

WD450

DRIP, TRACER: The WD450 "Top Mount" Thermodynamic Steam Trap Module mounted to a universal connector can be used anywhere conventional thermodynamic steam traps are used. Used on drip, tracing and light process applications where removal of air is not critical. The WD450 trap module mounts to any Universal Connector. The WD450 is recommended for horizontal piping only so that cap can be oriented upwards, as shown.

Note: Model WD450L is a lower-capacity version of the standard WD450 model.

CATALOG SPEC SHEET(S)

Model: WD450
Body Material: Stainless Steel
Max Capacity: 1,630 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
     

WD450SM

DRIP, TRACER: The WD450SM "Side Mount" Thermodynamic Steam Trap Module mounted to a universal connector can be used anywhere conventional thermodynamic steam traps are used. Used on drip, tracing and light process applications where removal of air is not critical. The WD450SM trap module mounts to any Universal Connector.

Note: Model WD450LSM is a lower-capacity version of the standard WD450SM model.

CATALOG SPEC SHEET(S)

Model: WD450SM
Body Material: Stainless Steel
Max Capacity: 1,630 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
     

WD600LSM-
HP

DRIP, TRACER: The WD600LSM-HP "Side Mount" Thermodynamic Steam Trap Module mounted to a universal connector can be used anywhere conventional thermodynamic steam traps are used. Used on drip, tracing and light process applications where removal of air is not critical. The WD600LSM-HP trap module mounts to any Universal Connector.

CATALOG SPEC SHEET(S)

Model: WD600LSM-HP
Body Material: Stainless Steel
Max Capacity: 730 lbs/hr
Max Operating Pressure: 600 PSIG
Connections: Fits WU450 Series Universal Connectors
     

WT450

DRIP, TRACER, PROCESS: The WT450 Thermostatic Steam Trap Module mounted on a universal connector can be used anywhere conventional thermostatic steam traps are used. Used on drip, tracing and light process applications. The WT450 trap module mounts to any universal connector.

CATALOG SPEC SHEET(S)

Model: WT450
Body Material: Stainless Steel
Max Capacity: 3,019 lbs/hr
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors
     

UB450

The UB450 Series Bi-Metallic Steam Trap Module is used in steam tracing applications (process lines, instrumentation and winterization, general steam jacketing) and small process applications where accurate control of condensate discharge temperature is required to provide maximum usage of energy.

CATALOG SPEC SHEET(S)

Model: UB450
Body Material: Stainless Steel
Max Capacity: 784 lbs/hr @ 280°F
Max Operating Pressure: 450 PSIG
Connections: Fits WU450 Series Universal Connectors

Products > Steam Traps > Universal Steam Trap Modules

 

Try Our Online Sizing & Selection Program!

Call, Fax or E-mail Us to Receive our Latest Product Catalog.

Questions? Contact us for your application needs.

Special requirements? Watson McDaniel can custom-engineer condensate pumping systems to meet your specific needs

Product Literature

Product Catalog - Steam Traps

Universal Style Steam Traps

Steam Trap Basics: An Introduction to Steam Traps