Filter By
Connection Size
Filter
AV813

AV813 Air Eliminator

The AV813 Air Eliminator is used for the removal of air and other gases from vessels or piping systems without allowing the contained liquid to escape.

How It Works

The valve and seat assembly inside the air eliminator is connected to a stainless steel float. When there is no liquid in the body of the air eliminator, the float will be in the down position, allowing air or other gases in the vessel or piping system to escape. When liquid enters the body, it will lift the float and the valve will be closed off before any liquid can escape.

Features

  • Rugged Cast Iron housing
  • Simple design for easy maintenance
  • Stainless steel internals
  • Optional Viton Valve Head for high temperatures and tight shut-off

Air Eliminators

AV813 and the AE1800 Series Air Eliminators are used for the removal of air and other gases from vessels or piping systems without allowing the contained liquid to escape. Air Eliminators are used only for liquid systems.

The AV813 Air Eliminator is used for the removal of air and other gases from vessels or piping systems without allowing the contained liquid to escape.

*AV813-V has Viton Plug

ModelSizeTypeWeight (lbs)
AV813-13-N3/4"NPT5
AV813-13-N-V3/4"NPT5
Product Overview
The AV813 Air Eliminator is used for the removal of air and other gases from vessels or piping systems without allowing the contained liquid to escape.
Features
• Rugged cast iron housing
• Simple design for easy maintenance
• Stainless steel internals
• Optional Viton Valve Head for high temperatures and tight shut-off
How It Works
The valve and seat assembly inside the air eliminator is connected to a stainless steel float. When there is no liquid in the body of the air eliminator, the float will be in the down position, allowing air or other gases in the vessel or piping system to escape. When liquid enters the body, it will lift the float and the valve will be closed off before any liquid can escape.
Selection / Sizing / Capacities
Dimension and Weight

Installation and Maintenance
The AV813 should be located at a high point in the system or vessel. The unit must be installed level and upright with flow upward for the float mechanism to operate properly. Isolation valves should be installed for ease of maintenance.
Sample Specification
Air Eliminator shall be of cast iron construction with stainless steel internals and soft EPDM seat for tight shut-off. Optional Viton seat is available for elevated temperatures and tight shut-off.