Products
Main Image
 
  • WSSCV-400x400
  • WSSCV-a-400x400
  • WSSCV-b-400x400
Technical Specification
  
Size1"
ConnectionSocket Weld
Max. Operating Pressure (psig)500
Max. Allowable Pressure (psig)750 PSIG @ 100˚F
Max. Allowable Temperature850˚F @ 420 PSIG
Weight (lbs)2.3
Dimension3.32(A),2.56(B)
Material Specification
  
Body316 SS
Disc316 SS
SpringInconel-X-750
WSSCV-14-SW-5
QTY :
Product Overview
The Model WSSCV is an all stainless steel in-line check valve for steam, gas, or liquid service. It provides tight shut-off, minimizes water hammer and also stops recycling of pumps by preventing back flow of liquid. Used in the petrochemical, pulp & paper, textile and food & beverage industries. The WSSCV all stainless steel check valves will operate much longer and are less problematic than bronze or cast iron check valves.
Features
• 316 Stainless Steel Body and Internals
• Low cracking pressure on spring (1/4 PSI) to minimize resistance and maximize flow.
• Available with optional 5 PSI cracking pressure (must specify at time of order)
• Available with NPT, SW, or optional Flanged connections
• Spring made from Inconel-X-750 to handle extreme temperature as well as corrosive applications
• Body is seam-welded to eliminate O-rings or gasket seals which can be affected by high temperature steam or hot condensate
• Spring assisted closing of check valve to minimize noise and wear
Selection / Sizing / Capacities

Please select model base on Cracking Pressure (PSI) in below tables

1. NPT connection type.
   
* Differential Pressure at which valve opens and flow occurs.
† WSSCVQF is a special design check valve for use on the inlet side of the PMPT & PMPNT Pumps. It is center-guided and contains no spring . Used for increasing fill rate of pump.

 2. Socket Weld (SW) connection type.
  
* Differential Pressure at which valve opens and flow occurs.

Dimensions and Weight

Sample Specification
Check valve shall have a 316 stainless steel body and disc. Spring shall be made from Inconel-X-750. Check valve body to be seam welded together to eliminate need for O-ring or gasket.