Filter By
Connection Size

Operating Condition
Motive Source
Load  
Filter
PMPNT

PMPNT Package System

The PMPNT(S) non-electric pressure motive pumps are light in weight and have an extremely low-profile. This package is capable of operating with a maximum motive pressure of 125 PSIG provided by steam, air or other gas supply. ASME Code Stamp available upon request.





Features
  • Low-profile design allows for condensate drainage of equipment positioned close to the floor
  • Equipped with our proven, Patented “Snap-Assure” mechanism which extends the useful life of the pump
  • Internal mechanism can be removed from the top of the pump while pump remains piped in line
  • Mechanism incorporates heat-treated stainless steel wear items
  • Dual compression springs made from Inconel-X-750 for high-temperature, corrosive service


Options
  • Gauge Glass
  • Cycle Counter
  • Insulation Covers
  • Motive Piping Components such as Steam Trap, Strainer and Regulator
  • Overflow Pipe Connection
  • ASME Code Stamp


SIMPLEX Systems

Cast Ductile Iron Pressure Motive Pump(s) with a Vented Receiver. Standardized Simplex, Duplex, Triplex, and Quadraplex packaged systems

Includes: Heavy-duty Pump, Steel Receiver, Isolation Valve(s), SS Check Valves, Schedule 40 Piping, and mounted on a Steel Base.

ModelSystemSizeTypeReceiver SizeMax Motive Pressure (psig)Capacity (lb/hr)
S-PMPNT-1X1-SS-3X36Simplex1" x 1"NPT3" x 36" Pipe Receiver125
S-PMPNT-1.5X1.5-SS-3X36Simplex1 1/2" x 1 1/2"NPT3" x 36" Pipe Receiver125
S-PMPNT-1X1-SS-4X36Simplex1" x 1"NPT4" x 36" Pipe Receiver125
S-PMPNT-1.5X1.5-SS-4X36Simplex1 1/2" x 1 1/2"NPT4" x 36" Pipe Receiver125
S-PMPNT-1X1-SS-6X36Simplex1" x 1"NPT6" x 36" Pipe Receiver125
S-PMPNT-1.5X1.5-SS-6X36Simplex1 1/2" x 1 1/2"NPT6" x 36" Pipe Receiver125
Product Overview
The PMPNT series (cast ductile iron pressure motive pump) with a Vented Receiver. Standardized Simplex, Duplex, Triplex, and Quadraplex packaged systems include stand-alone pump(s), check valves and vented receiver, mounted on a steel base and frame. Multiple pumping units can be used for increased capacity or for system redundancy. The PMP units are available in ductile iron, carbon steel and stainless steel. Additional options include sight glasses, insulation jackets, cycle counters, motive and vent piping, pressure regulators, steam traps, strainers, ASME code stamps, etc.

Includes: Heavy-duty Pump, Steel Receiver, Isolation Valve(s), SS Check Valves, Schedule 40 Piping, and mounted on a Steel Base.