PMPT with receiver | Pump-Trap Combinations | Pumps

Filter By

Size

1" x 1"
1 1/2" x 1 1/2"

Operating Condition

Over Set Pressure
Temperature

Motive Pressure
Back Pressure
Min. Δ Pressure

Fill Head
Motive Source
Load

Filter

PMPT with receiver

Introduction

To learn and see more about Pre-Packaged Pumps, Please Visit the Pre-Packaged Pumps Systems Section.

PMPT with receiver

Ductile Iron Pump-Trap Combination with Internal Steam Trap

Includes: Pump-Trap, Steel Receiver, Isolation Valve(s), SS Check Valves, Piping, and mounted on a Steel Base..

Model	System	Size	Type	Receiver Size	Max Motive Pressure (psig)
S-PMPT-1X1-SS-3X36	Simplex	1" x 1"	NPT	3" x 36" Pipe Receiver	125
S-PMPT-1X1-SS-4X36	Simplex	1" x 1"	NPT	4" x 36" Pipe Receiver	125
S-PMPT-1X1-SS-6X36	Simplex	1" x 1"	NPT	6" x 36" Pipe Receiver	125
S-PMPT-1.5X1.5-SS-3X36	Simplex	1 1/2" x 1 1/2"	NPT	3" x 36" Pipe Receiver	125
S-PMPT-1.5X1.5-SS-4X36	Simplex	1 1/2" x 1 1/2"	NPT	4" x 36" Pipe Receiver	125
S-PMPT-1.5X1.5-SS-6X36	Simplex	1 1/2" x 1 1/2"	NPT	6" x 36" Pipe Receiver	125

Product Overview

The PMPT series (ductile iron pump-trap combination with internal steam traps) with a Vented Receiver. Standardized Simplex, Duplex, Triplex, and Quadraplex packaged systems include stand-alone pump(s), check valves and vented receiver, mounted on a steel base and frame. Multiple pumping units can be used for increased capacity or for system redundancy. The PMP units are available in ductile iron, carbon steel and stainless steel. Additional options include sight glasses, insulation jackets, cycle counters, motive and vent piping, pressure regulators, steam traps, strainers, ASME code stamps, etc.

Includes: Pump-Trap, Steel Receiver, Isolation Valve(s), SS Check Valves, Schedule 40 Piping, and mounted on a Steel Base.