Filter By
Connection Size




Operating Condition
Fill Head
Motive Source
Load  
Filter
PMPC

PMPC Pressure Motive Pump

The PMPC Model Ductile Iron non-electric pressure motive pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances. This stand-alone pump is capable of operating with a maximum motive pressure of 200 PSIG by steam, air or other gas supply. ASME “UM” code stamp is available.





Features
  • Equipped with our Patented “Snap-Assure” Mechanism which extends the useful life of the pump
  • Mechanism incorporates heat-treated stainless steel wear items
  • All stainless steel internals for ultimate corrosion resistance
  • Dual compression springs made from Inconel-X-750 for high-temperature corrosive service
  • Operates using steam, air, nitrogen or other pressurized gases as the motive force
  • Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas


Sample Specification
The non-electric pressure powered pump shall be capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. The pump body shall be cast ASTM A-395 Ductile Iron capable of an ASME “UM” code stamp if requested. The pump mechanism shall be float operated with a patented “Snap-Assure” feature constructed of all stainless steel materials with all load bearing points hardened for extended service life. The mechanism shall feature two Inconel springs used in compression with motive & vent valves hardened to 40c Rockwell.

Dimensions Chart




Capacity Charts


The PMPC pressure motive pump body & cover are manufactured from ductile iron. ASME “UM” code stamp is available. This pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances.                                                                   

ModelSizeMax Motive Pressure (psig)Capacity (lb/hr)Fill Head
PMPC-1X1-N-SS1" x 1"20012"
PMPC-1.5X1-N-SS1 1/2" x 1"20012"
PMPC-1.5X1.5-N-SS1 1/2" x 1 1/2"20012"
PMPC-2X1-N-SS2" x 1"20012"
PMPC-2X1.5-N-SS2" x 1 1/2"20012"
PMPC-2X2-N-SS2" x 2"20012"
PMPC-3X2-N-SS3" x 2"20012"
Product Overview
The PMPC model Ductile Iron non-electric pressure motive pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances. This stand-alone pump is capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. ASME “UM” code stamp is available.
Features
• Equipped with our Patented “Snap-Assure” Mechanism which extends the useful life of the pump
• Mechanism incorporates heat-treated stainless steel wear items
• All stainless steel internals for ultimate corrosion resistance
• Dual compression springs made from Inconel-X-750 for high-temperature corrosive service
• Operates using steam, air, nitrogen or other pressurized gases as the motive force
Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas
Dimension and Weights

Sample Specification
The non-electric pressure powered pump shall be capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. The pump body shall be cast ASTM A-395 Ductile Iron capable of an ASME “UM” code stamp if requested. The pump mechanism shall be float operated with a patented “Snap-Assure” feature constructed of all stainless steel materials with all load bearing points hardened for extended service life. The mechanism shall feature two Inconel springs used in compression with motive & vent valves hardened to 40c Rockwell.