Filter By
Connection Size
Special Options
Operating Condition
Fill Head
Motive Source
Load  
Filter
PMPF

PMPF Pressure Motive Pump

The PMPF model Carbon Steel non-electric pressure motive pumpis typically used when liquids must be moved to higher elevation, higher pressure or extended distances. This stand-alone pump is capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. These tanks are fabricated with 1/8” corrosion allowance and receive the ASME “UM” code stamp.





Features
  • Equipped with our Patented “Snap-Assure” Mechanism which extends the useful life of the pump
  • Mechanism incorporates heat-treated stainless steel wear items
  • All stainless steel internals for ultimate corrosion resistance
  • Dual compression springs made from Inconel-X-750 for high-temperature corrosive service
  • Operates using steam, air, nitrogen or other pressurized gases as the motive force
  • Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas


Sample Specification
The non-electric pressure powered pump shall be capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. The pump body shall be fabricated carbon steel and certified with the ASME “UM” code stamp. The pump mechanism shall be float operated with a patented “Snap-Assure” feature constructed of all stainless steel materials with all load bearing points hardened for extended service life. The mechanism shall feature two Inconel springs used in compression with motive & vent valves hardened to 40c Rockwell.

Dimensions Chart


Capacity Charts


PMPSS Pressure Motive Pump

The PMPSS model Stainless Steel non-electric pressure motive pump can be used in harsh and corrosive environments or as a substitute for fabricated carbon steel tanks for increased longevity. This stand-alone pump is capable of operating with a  maximum motive pressure of 150 PSIG provided by steam, air or other gas supply. These pumps receive the ASME “UM” code stamp.





Features
  • Equipped with our Patented “Snap-Assure” Mechanism which extends the useful life of the pump
  • Mechanism incorporates heat-treated stainless steel wear items
  • All stainless steel internals for ultimate corrosion resistance
  • Dual compression springs made from Inconel-X-750 for high-temperature corrosive service
  • Operates using steam, air, nitrogen or other pressurized gases as the motive force
  • Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas


Sample Specification
The non-electric pressure powered pump shall be capable of operating with a maximum motive pressure of 150 PSIG provided by steam, air or other gas supply. The pump body shall be 304L Stainless Steel and certified with the ASME “UM” code stamp. The pump mechanism shall be float operated with a patented “Snap-Assure” feature constructed of all stainless steel materials with all load bearing points hardened for extended service life. The mechanism shall feature two Inconel springs used in compression with motive and vent valves hardened to 40c Rockwell.

Dimensions Chart


Capacity Charts


PMPF Pressure Motive Pumps

The PMPF / PMPSS pressure motive pump body & cover are manufactured from Carbon Steel / Stainless Steel. These tanks are fabricated with 1/8” corrosion allowance and receive the ASME “UM” code stamp. This pump is typically used when liquids must be moved to higher elevation,higher pressure or extended distances.

ModelPump BodySizeMax Motive Pressure (psig)Capacity (lb/hr)Fill Head
PMPF-1.5X1-N-SSCarbon Steel1 1/2" x 1"20012"
PMPF-2X1-N-SSCarbon Steel2" x 1"20012"
PMPF-2X1.5-N-SSCarbon Steel2" x 1 1/2"20012"
PMPF-2X2-N-SSCarbon Steel2" x 2"20012"
PMPF-3X2-N-SSCarbon Steel3" x 2"20012"
PMPF-1.5X1.5-N-SSCarbon Steel1 1/2" x 1 1/2"20012"
Downloads
Catalog Spec Sheet (pdf)
I&M (pdf)
Product Overview
The PMPF (Carbon Steel body) and  PMPSS (Stainless Steel body) non-electric pressure motive pumps are typically used when liquids must be moved to higher elevation, higher pressure or extended distances. This stand-alone pump is capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. These tanks are fabricated with 1/8” corrosion allowance and receive the ASME “UM” code stamp.
Features
• Equipped with our Patented “Snap-Assure” Mechanism which extends the useful life of the pump
• Mechanism incorporates heat-treated stainless steel wear items
• All stainless steel internals for ultimate corrosion resistance
• Dual compression springs made from Inconel-X-750 for high-temperature corrosive service
• Operates using steam, air, nitrogen or other pressurized gases as the motive force
• Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas
Dimension and Weights

Sample Specification
The non-electric pressure powered pump shall be capable of operating with a maximum motive pressure of 200 PSIG provided by steam, air or other gas supply. The pump body shall be fabricated carbon steel and certified with the ASME “UM” code stamp. The pump mechanism shall be float operated with a patented “Snap-Assure” feature constructed of all stainless steel materials with all load bearing points hardened for extended service life. The mechanism shall feature two Inconel springs used in compression with motive & vent valves hardened to 40c Rockwell.