Filter By
Special Options
Operating Condition
Fill Head
Motive Source
Load  
Filter
PMPNT

PMPNT Pressure Motive Pump

The PMPNT(S) non-electric pressure motive pumps are light in weight and have an extremely low-profile. This package is capable of operating with a maximum motive pressure of 125 PSIG provided by steam, air or other gas supply. ASME Code Stamp available upon request





Features
  • Equipped with our proven, Patented “Snap-Assure” mechanism which extends the useful life of the pump
  • Internal mechanism can be removed from the top of the pump while pump remains piped in line
  • Mechanism incorporates heat-treated stainless steel wear items for ultimate corrosion resistance
  • Dual compression springs made from Inconel-X-750 for high-temperature, corrosive service
  • Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas
  • Operates using steam, air, nitrogen or other pressurized gas as the motive force


PMPNT Pressure Motive Pumps

The PMPNT is a low-profile pressure motive pump used for applications requiring compact design due to spatial constraints. This pump is typically used when liquids must be moved to higher elevation, higher pressure or extended distances. Includes: Body, Cover, Internal mechanism and Check valves. The tank body is available in ductile iron or stainless steel.

ModelPump BodySizeMax Motive Pressure (psig)Capacity (lb/hr)Fill Head
PMPNT-1X1-N-SSDuctile Iron1" x 1"1256"
PMPNT-1.5X1.5-N-SSDuctile Iron1 1/2" x 1 1/2"1256"
Downloads
Catalog Spec Sheet (pdf)
I&M (pdf)
Product Overview
The PMPNT(S) non-electric pressure motive pumps are light in weight and have an extremely low-profile. This stand-alone pump is capable of operating with a maximum motive pressure of 125 PSIG provided by steam, air or other gas supply. ASME Code Stamp available upon request.
Features
• Equipped with our proven, Patented “Snap-Assure” mechanism which extends the useful life of the pump
• Internal mechanism can be removed from the top of the pump while pump remains piped in line
• Mechanism incorporates heat-treated stainless steel wear items for ultimate corrosion resistance
• Dual compression springs made from Inconel-X-750 for high-temperature, corrosive service
• Non-Electric – can be used in remote locations or NEMA 4, 7, 9 and hazardous areas
• Operates using steam, air, nitrogen or other pressurized gas as the motive force
Selection / Sizing / Capacities


Note: Multiply Capacity by 1.16 for 12” Fill Head.
Multiply Capacity by 1.28 for 18” Fill Head.
Dimension and Weights