Products
Main Image
 
  • PA-400x400
  • PA-a-400x400
  • PA-b-400x400
Technical Specification
  
Pressure Pilot 
Max. Inlet Pressure (psig)300
Reduced Outlet Pressure Range (PSIG)20 - 200
Material Specification
  
Pilot CoverCast Iron
Head Gasket302 SS
Cover ScrewsSteel,GR5
Head AssemblyHardened SST (55Rc)
PA-6
QTY :
Product Overview
The PA Air-Loaded Pressure Pilot is used with the HD Regulator to control steam pressure on steam mains and process equipment. The principal advantage the PA-Air Pilot has over standard spring-loaded pilots is that pressure adjustments to the regulator can be made from a remote location. A regulator that is located in a difficult to reach or inaccessible location can be adjusted by a remote control panel board. The PA-Air Pilot can also be used in conjunction with the PTL or PTR pneumatic temperature controllers for controlling temperature in process applications.
Features
• Pressure adjustments to the regulator can be done from a remote location using an air signal
• Air-operated pilot ensures instant response and extremely accurate control
• Full port strainer and blowdown valve on pilot adapter for protection of pilot from dirt and scale
• Controls pressure settings within ±1 PSIG
How It Works
When air pressure is applied to the upper chamber of the air pilot it exerts a downward force on the air pilot’s diaphragm. This force controls the outlet pressure of the steam through the regulating valve. The control process is similar to a spring loaded pressure pilot except that the air pressure takes the place of the spring. There are three separate models of air pilots that make up the complete range depending on the steam pressure that needs to be controlled and the control air pressure available. Maximum control air pressure on air pilots is 125 PSIG.The larger Diaphragm area of the PA4 & PA6 Air Pilots allow the use of lower control air pressure to regulate higher pressure steam.

See Pressure Adjusting Ranges chart.


 

Selection / Sizing / Capacities
PA - AIR PILOT
Specify:
• Air Pilot PA1, PA4 or PA6
• Remote Control Panel Board (PL1, PL2 or PL3)

Example:
The PA-Air Pilot is being used in conjunction with the PL2 Control Panel Board( PL Accessory) to regulate steam pressure. A small air regulator on the panel board can be adjusted to control the air pressure to the pilot. One gauge on the panel board measures air line pressure to the panel board and the other gauge shows the air pressure being sent to the pilot. Steam pressure at the outlet of the regulator is controlled by the air pressure signal to the pilot. Depending on the air pilot model chosen (PA1, PA4, PA6), there will be a 1:1, 4:1, or 6:1 ratio of outlet steam pressure to air pressure.

REGULATOR BODY
Specify:
• HD regulator body
• Regulator size or capacity and pressure range of steam required
• End connections (threaded, 150/300# flanged)

Dimension and Weights