OSS-Series (for Gas) | O-Series | Regulators

Filter By

Connection Size

1/2"
3/4"
1"
1 1/4"

Operating Condition

Over Set Pressure
Temperature
Fluid
Inlet Pressure
Reduced Pressure
Min. Δ Pressure
Fluid Temperature
Fill Head
Motive Source
Load

Filter

OSS-Series (for Gas)

Introduction

This is the OSS-Series for Gas applications. For Steam or Liquid applications or for more information, please see the OSS-Series main section.

OSS-Series (for Gas)

Air & Gases: The OSS Series, with Stainless Steel CF8M body and Hardened 420 Stainless Steel seat, is suitable for a wide range of applications in the low-to-moderate flow range.

Size	Connection	Inlet Pressure Range (PSIG)	Max Capacity
1/2" - 1 1/4"	NPT	15-250	Gases - 1,189 SCFM.

Model	Size	Type	Spring Type	Reduced Pressure Range (psig)	Max Inlet Pressure (psig)
OSS-14-N-0007-V	1"	NPT	Single	0 - 10	250
OSS-15-N-0008-V	1 1/4"	NPT	Single	10 - 30	250
OSS-12-N-09-V	1/2"	NPT	Single	40 - 100	250
OSS-12-N-10-V	1/2"	NPT	Single	100 - 200	250
OSS-12-N-14-V	1/2"	NPT	Single	10 - 50	250
OSS-15-N-0007-V	1 1/4"	NPT	Single	0 - 10	250
OSS-15-N-0010-V	1 1/4"	NPT	Single	40 - 85	250
OSS-13-N-10-V	3/4"	NPT	Single	100 - 200	250
OSS-13-N-13-V	3/4"	NPT	Single	0 - 10	250
OSS-14-N-0009-V	1"	NPT	Single	30 - 50	250
OSS-14-N-0010-V	1"	NPT	Single	40 - 85	250
OSS-12-N-13-V	1/2"	NPT	Single	0 - 10	250
OSS-13-N-14-V	3/4"	NPT	Single	10 - 50	250
OSS-14-N-0008-V	1"	NPT	Single	10 - 30	250
OSS-15-N-0009-V	1 1/4"	NPT	Single	30 - 50	250

Downloads

Catalog Spec Sheet (pdf)

I&M (pdf)

Product Overview

The O-Series direct-operated pressure regulators with heavy duty cast iron bodies and internal strainer are suitable for a wide range of applications in the low-to-moderate flow range. Applications include small heaters, humidifiers, various hospital equipment, tire molds, as well as many other general uses. This style of regulator does not require an external sensing line. Set pressure is controlled by turning an adjustment screw with lock nut that increases or decreases spring force above the diaphragm. Several spring ranges are available, depending upon the downstream pressure that needs to be maintained. O-Series contains hardened stainless steel seat and disc for extended service life. Phosphor Bronze Diaphragm specifically designed for Steam service is considered a preferred choice over Stainless Steel diaphragms which are prone to work-hardening and potential cracking. Viton diaphragms are specifically designed for water, air, gases and other liquid service and have a working temperature range up to 300°F.

Features

• Hardened stainless steel seat and disc for extended service life (55 Rc)
• Phosphor Bronze diaphragm for Steam Service
• Viton diaphragm for up to 300ºF for Water, Oil & Air Service
• Double spring available for extended outlet pressure range
•Integral stainless steel strainer on 3/4” HC, 1”, 1-1/4”, 1-1/2” & 2”

Selection / Sizing / Capacities

From the Capacity chart, find the inlet pressure and required regulator outlet pressure. Follow across chart to nearest capacity (steam, air, water) that meets or slightly exceeds demand requirements. Follow vertically up to determine appropriate size. When exact application values are not shown, interpolate between values. Select a model with the spring range that accommodates the required outlet set pressure.

Example:
Application: 200 SCFM of 100 PSIG of Air reduced to 30 PSIG
Model Code: OHC-13-N-0005-V (3/4” HC O-Series, 30-50 PSIG spring range, NPT for Air)

** 3/4" HC is high-capacity version of standard 3/4" valve.
Note: For capacities of other gases multiply the air capacities by the following factors: Argon–0.85 CO2 –0.81 Helium–2.69 Nitrogen–1.02.

Dimension and Weights