Filter By
Operating Condition
Condensate Load  
Filter
FDA300

FDA300 Thermostatic Clean Steam

FDA300 Dimensions

FDA300

PROCESS: FDA300 Series high-capacity thermostatic clean steams traps are used on clean steam applications, and for condensate drainage on CIP/SIP systems and various process vessels.

ModelSizeTypeMax PMO (psig)Max Capacity @ Max PMO (lb/hr)
FDA300-16-TCTC1 1/2"TC x TC90
Downloads
Catalog Spec Sheet (pdf)
Product Overview
PROCESS: FDA300 Series high-capacity thermostatic clean steams traps are used on clean steam applications, and for condensate drainage on CIP/SIP systems and various process vessels.
Features
• All wetted parts are 316L stainless steel
• Electro-polish finish of 20-25 microinches RA on internal surfaces of body
• Electro-polish finish of 25-32 microinches RA on external surfaces of body
• Operates close to saturation curve to minimize condensate back-up
• Completely self-draining in the vertical downward flow orientation
How It Works
This trap contains a welded 316L stainless steel thermal element that expands when heated and contracts when cooled. When air and subcooled condensate are present, the trap is in an open discharge position. When steam reaches the trap, the element expands, closing the trap tightly.
Selection / Sizing / Capacities
The steam Trap shall be all 316L stainless steel thermostatic type with a balanced pressure bellows that operates close to saturated steam temperatures. Internal body parts shall have an electro-polish finish of 20-25 microinches RA internally and a 25-32 finish externally. The unit shall have a split-body sanitary clamp design for easy maintenance. Trap shall be completely self-draining when mounted vertically.


Note:  Capacities at 9ºF below saturated steam temperature.
Dimension and Weights