Filter By
Operating Condition
Condensate Load  
Filter
TA25B
Radiator Steam Traps are predominantly used in the HVAC industry because the quick-disconnect right angle connection is found on most radiator installations. Their excellent air handling capabilities, compact size, and economical cost make them a great choice for air vents on heat exchangers or for steam trap applications on OEM equipment. To learn more and see more about Radiator Steam Traps, please visit Radiator Traps section.
TA25B

The TA25B Series Radiator Trap with Right Angle Connection are Thermostatic Steam Traps that were specifically designed for removing condensate and air from 2-pipe steam heating systems. The bodies are made from a high-quality brass forging and can be fully repaired while the product remains in-line by removing the cap and easily replacing the seat and thermal element. It is available in 1/2" & 3/4" NPT connections with pressure ranges: 25 PSIG.

ModelSizeTypeMax PMO (psig)Max Capacity @ Max PMO (lb/hr)
TA25B-12-N1/2"NPT25
TA25B-13-N3/4"NPT25
Downloads
Catalog Spec Sheet (pdf)
I&M (pdf)
Condensed I&M (pdf)
Product Overview
TA & TS type steam traps are predominantly used in the HVAC industry. They are referred to as radiator traps because the quick-disconnect right angle connection of the TA Type is found on most steam radiator installations. The TS Type offers a straight-through connection alternative. TA and TS Series radiator traps were designed specifically for removing condensate and air from 2-pipe steam heating systems. Their excellent air-handling capabilities, compact size, and economical cost make them a great choice for air vents on heat exchangers or for steam trap applications on OEM equipment. Contains an extremely strong and rugged precision-welded Stainless Steel thermal element which is highly resistant to waterhammer.
Features
• Excellent air handling capability
• In-line repairable
• Welded stainless steel thermal element
• Stainless seat on TA125 & TS125
• High thermal efficiency
How It Works
This thermostatic trap contains a welded stainless steel thermal element that expands when heated and contracts when cooled. When air and condensate are present the trap is in the open discharge position. When steam reaches the trap the element expands and closes off tightly.
Selection / Sizing / Capacities

Select differential pressure; follow column down to correct capacity (lbs/hr) block.

Example:
Application: 2100 lbs/hr at 40 PSI differential pressure
Size/Model: 3/4” TA125

Dimension and Weights
Installation and Maintenance
Trap can be installed in any orientation. The bodies are made from a high-quality brass forging and are easily repairable while the steam trap remains in-line by removing the cap and replacing the seat and thermal element. Repair kit includes thermal element, seat and gasket.