DRIP, TRACING: The TD700S Thermodynamic steam trap is commonly used as a drip trap on steam mains and steam supply lines. These traps are used on tracing applications; however, thermostatic traps are normally recommended for this service. Supplied with an integral strainer and optional blow down valve to protect the trap from contamination. The internal working mechanism of the TD700S can be completely replaced while the trap body remains in line. Ideal for outdoor applications that are subject to freezing and for super heated steam conditions. TDF700S is forged steel with full material traceability (MTR)for Petroleum Industry.

• "Quick-Replace" capsule design for easy in-line repair
• Integral strainer with optional blowdown valve to protect trap from contamination
• High pressure applications up to 600 PSIG for TD700S and up to 650 PSIG for TDF700S
• Hardened stainless steel seat and disc for extended service life even at high pressure
• Single trap will operate over the entire pressure range 4-600 PSIG for TD700S and range 4-650 PSIG for TDF700S (recommended above 30 PSI)
• Suitable for superheated steam
• Freeze-proof when trap is piped in a vertical orientation for complete drainage of condensate
• Non-integral seat and chrome-moly body allow for trap to be welded in-line
• Trap will function in any orientation (horizontal preferred)

The TD700HS is a high pressure version of the standard TD700S  model. While both the TD700S and TD700HS will operate with  pressures up to 600 PSIG, the TD700HS has a slightly smaller  dicharge orifice and is recommended for system pressures over 300 PSIG because of increased efficiency and performance. The TD700S is available in NPT, socket weld, and flange connections from 1/2” through 1”. Replacement capsules are available,  see Parts & Kits Section.

Select working pressure; follow column down to correct capacity (lbs/hr) block.

Example:
Application: 275 lbs/hr at 100 PSIG working inlet pressure
Size/Model:  TD700S, specify pipe size and connections (NPT, SW, FLG)

TD700HS = The high pressure version of the TD700S.
The standard model TD700S will operate over the entire pressure range, however, the TD700HS will operate more efficiently and have a longer service life for pressures over 300 PSIG.

TD700S = Standard pressure capsule 4-300 PSIG
TD700HS = High pressure capsule 150-600 PSIG

TDF700S = Standard pressure capsule 4-300 PSIG, Forged Steel body material with full material traceability (MTR).
TDF700HS = High pressure capsule 150-600 PSIG, Forged Steel body material with full material traceability (MTR).

Option: TD700SB = Blowdown Valve
Option: TDF700SB, = Forged Steel body material with full material traceability (MTR) and Blowdown Valve.