Filter By
Operating Condition
Condensate Load  
Filter
UFT450

UFT450 Float & Thermostatic Trap Module

Horizontal Piping (Connector with Strainer)

Vertical Piping (Connector with Strainer)

DRIP, PROCESS: The UFT450 Float & Thermostatic steam trap module can be used on small process equipment which generate light condensate loads. F&T traps have excellent air handling capability. These F&T trap modules can also be used in drip service on steam mains and steam supply lines. Mounts to any Universal Connector.

ModelMax PMO (psig)Max Capacity @ Max PMO (lb/hr)Weight (lbs)
UFT450-1451458505.5
UFT450-151515005.5
UFT450-4504506265.5
UFT450-2252256805.5
UFT450-656511105.5
Product Overview
PROCESS, DRIP: The UFT450 Float & Thermostatic steam trap module can be used on small process equipment which generate light condensate loads. F&T traps have excellent air handling capability. These F&T trap modules can also be used in drip service on steam mains and steam supply lines. Mounts to any universal connector.
Features
• Trap module can be easily removed and replaced in minutes without having to disconnect any piping
• Hardened stainless steel valves and seat
• Freeze-resistant
• Connectors available with integral strainers and blowdown valves
• 360º swivel design for convenient installation
How It Works
The UC450 universal connector is permanently installed into the pipeline where the steam trap would normally be placed. The trap module, which functions like any F&T steam trap, is fastened to the universal connector with two bolts. When a new trap module is needed, it can be easily removed and replaced with a standard open-end or socket wrench without disturbing the existing piping.
Selection / Sizing / Capacities

Select a model with a PMO (maximum operating pressure) that meets or exceeds the steam pressure of the system.

Example:The UFT450-65 has a maximum operating pressure of 65 PSI. Any universal connector can be used. Recommended connector: UC450SR

Dimension and Weights
             
Options
Universal Connectors are available with an integral strainer and blowdown valve. Connector is purchased separately. See the Universal Connectors section for more information.
Installation and Maintenance
Universal connector is first permanently threaded or welded into piping system. The UFT450 mounts to any 2-Bolt Quick-Change Universal Connector. Trap module must be installed in orientation shown. The trap module is bolted to the universal connector with two bolts. When a new trap module is needed, it can be easily removed and replaced with a standard open-end or socket wrench without disturbing the existing piping.
Sample Specification
The steam trap shall be an all stainless steel modular design, float & thermostatic unit. The thermostatic air vent to be pressure balanced welded bellows. The trap shall have a 360 degree swivel mount on a stainless steel Universal Connector that is available with integral strainer and blowdown valve options.